GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Grand Am 🢒 Body 🢒 Body Front End 🢒 Hood Rear Outer Seal Replacement

Removal Procedure

    Object Number: 330113 Size: SH
  1. Open the hood.
  2. Pull the rear side hood seal from the pinch-weld flange and hood hinge.
  3. Remove the seal from the vehicle.
  4. Clean any adhesive from the pinch-weld flange and hood hinge using 3M P/N 8984 Adhesive Remover.

Installation Procedure

    Object Number: 330113 Size: SH
  1. Remove the protective backing paper from the adhesive on the rear side hood seal.
  2. Install the rear side hood seal to the pinch-weld flange and hood hinge.
  3. Press the rear side hood seal onto the pinch-weld flange and hood hinge until the adhesive is fully adhered.
  4. Close the hood.