ILLUMINATED LOCK CYLINDER AND LOCK ASSEMBLY

Models Affected: 1989 GRAND PRIX

1. Door handle cover assembly. Refer to DOORS (Section 10-5) in the Service Manual.

2. Lock rod from lock cylinder.

3. Screw securing lock cylinder to door.

4. Lock cylinder, spacer and theft deterrent shield.

5. Door trim panel. Refer to DOORS (Section 10-5) in the Service Manual.

6. Screws from switch and door.

7. Connector

8. Lamp assembly, switch and harness from door.

INSTALL OR CONNECT

1. Lamp assembly, switch and harness to door.

2. Screws to switch and door.

3. Connector.

4. Door trim panel. Refer to DOORS (Section 10-5) in the Service Manual.

5. Theft deterrent shield, spacer and lock cylinder.

6. Screw

- Tighten - Screw to 10 N.m (89 lb. in.)

7. Lock rod to lock cylinder.

8. Door handle cover assembly. Refer to DOORS (Section 10-5) in the Service Manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.