INFO. REGARDING CONVERSION FROM ENGLISH TO METRIC

SUBJECT: DRIVER'S INFORMATION CENTRE (INFORMATION REGARDING CONVERSION ENGLISH VS. METRIC)

VEHICLES AFFECTED: 1990 GRAND PRIX SE AND STE

This bulletin is being issued to inform Dealers about English and metric units on the Driver's Information Centre display.

On the SE models the Driver's Information Centre is not designed to change from English to metric units. If the car was first sold in the United States, the Centre is wired to display English units only. If the car was first sold in Canada, the Centre is wired to display metric units only.

On the STE models the Centre may be changed from English to metric units or from metric to English units.

1. Press the MODE button on the STE Driver's Information Centre until English or Metric appears.

2. Press SET to change from English to metric units or from metric to English units.

After 5 seconds, the display will return to normal.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.