Wheel Speed Sensor Jumper Harness Replacement Front

1. Raise and support the vehicle on a suitable hoist. Refer to Lifting and Jacking the Vehicle in General Information.
2. Disconnect the front wheel speed jumper harness connector from the front wheel sensor.
3. Remove the harness (4) from the control arm retaining clips (3).
4. Remove the harness (4) from the splash shield retaining clip (5).
5. Lower the vehicle.
6. Disconnect the front wheel speed sensor jumper harness to ABS harness connector (8).
7. Remove the front wheel speed sensor jumper harness (4).

1. Connect the front wheel speed sensor jumper harness to ABS harness connector (8).
2. Raise and support the vehicle on a suitable hoist. Refer to Lifting and Jacking the Vehicle in General Information.
3. Install the harness (4) to splash shield retaining clip (5).
4. Install the harness (4) to control arm retaining clips (3).
5. Connect the front wheel speed sensor jumper harness connector to the wheel speed sensor.
6. Lower the vehicle.
7. Turn the ignition switch to the RUN position, with the engine off.
8. Perform the Diagnostic System Check

Wheel Speed Sensor Jumper Harness Replacement Rear

1. Raise and support the vehicle on a suitable hoist. Refer to Lifting and Jacking the Vehicle in General Information.
2. Disconnect the rear wheel speed jumper harness connector at the pass thru connector.
3. Disconnect the rear wheel speed sensor jumper harness connector from the wheel speed sensor.
4. Remove the rear wheel speed sensor jumper harness (1) from the retaining clips (2).
5. Remove the rear wheel speed sensor jumper harness.

1. Connect the rear wheel speed sensor jumper harness connector to the wheel speed sensor.
2. Install the rear wheel speed jumper harness (1) into the retaining clips (2).
3. Connect the rear wheel speed sensor jumper harness connector to the pass thru connector.
4. Lower the vehicle.
5. Turn the ignition switch to the RUN position, with the engine off.
6. Perform the Diagnostic System Check