Removal Procedure
- Remove the headlamp assembly from the vehicle. Refer to
Headlamp Replacement
.
- Disconnect the electrical connector from the headlamp bulb.
- Rotate the headlamp bulb retaining ring counterclockwise to release,
then remove the ring.
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
| • | Turn off the lamp switch and allow the bulb to cool before changing
the bulb. |
| • | Leave the lamp switch OFF until the bulb change is complete. |
| • | Always wear eye protection when changing a halogen bulb. |
| • | Handle the bulb only by its base. Avoid touching the glass. |
| • | Keep dirt and moisture off the bulb. |
| • | Properly dispose of the used bulb. |
| • | Keep halogen bulbs out of the reach of children. |
- Remove the
headlamp bulb from the capsule.
Installation Procedure
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
| • | Turn off the lamp switch and allow the bulb to cool before changing
the bulb. |
| • | Leave the lamp switch OFF until the bulb change is complete. |
| • | Always wear eye protection when changing a halogen bulb. |
| • | Handle the bulb only by its base. Avoid touching the glass. |
| • | Keep dirt and moisture off the bulb. |
| • | Properly dispose of the used bulb. |
| • | Keep halogen bulbs out of the reach of children. |
- Install
the headlamp bulb to the capsule.
- Install the headlamp bulb retaining ring to the capsule, then
rotate clockwise to secure.
- Install the headlamp assembly to the vehicle. Refer to
Headlamp Replacement
.
