Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Inspect the HEADLAMP circuit breaker. Is the circuit breaker open? | -- | Go to Step 9 | Go to Step 2 |
2 |
Does the test light illuminate? | -- | Go to Step 8 | Go to Step 3 |
3 | Using a test light, backprobe between the headlamp switch harness connector terminal L and ground. Does the test light illuminate? | -- | Go to Step 7 | Go to Step 4 |
4 | Using a test light, backprobe between the headlamp switch harness connector terminal N to ground. Does the test light illuminate? | -- | Go to Step 5 | Go to Step 6 |
5 | Replace the headlamp switch. Refer to Headlamp Switch Replacement . Is the repair complete? | -- | -- | |
6 | Repair the poor connection or open in CKT 2440. Is the repair complete? | -- | -- | |
7 | Repair the poor connection or open in CKT 10 between the headlamp switch harness connector terminal L and C201 terminal E13. Is the repair complete? | -- | -- | |
8 | Replace the headlamp dimmer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in steering wheel and column. Is the repair complete? | -- | -- | |
9 | Repair a short to ground in CKT 2440. Is the repair complete? | -- | -- |
