Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Turn the headlamp switch to the HEAD position.
- Turn the headlamp dimmer switch to the HIGH position.
Is the high beam indicator in the instrument cluster ON?
| --
| Go to
Step 3
| Go to
Step 2
|
2
|
- Check CKT 11 for a poor connection or an open.
- Check CKT 11 for a short to ground.
- If OK, replace the headlamp dimmer switch. Refer to
Multifunction Turn Signal Lever Replacement - On Vehicle
in steering wheel and column
Is the repair complete?
| --
| Go to
Daytime Running Lights (DRL) System Check
| --
|
3
|
- Disconnect the underhood accessory wiring junction block connector C2.
- Using a test light, probe the underhood accessory wiring junction
block connector C2 terminal F4 to ground.
Does the test light illuminate?
| --
| Go to
Step 4
| Go to
Step 5
|
4
| Replace the underhood accessory wiring junction block. Refer to Junction
Block Replacement - Accessory Wiring in Body Front End.
Is the repair complete?
| --
| Go to
Daytime Running Lights (DRL) System Check
| --
|
5
| Repair the poor connection or open in CKT 11 between S219 and
the underhood accessory wiring junction block harness connector C2
terminal F4.
Is the repair complete?
| --
| Go to
Daytime Running Lights (DRL) System Check
| --
|
