Removal Procedure
- Turn ignition switch to
the ACCY position.
- Set the wiper switch to the PULSE position.
- Turn the ignition off when the wipers are in midwipe.
- Remove the wiper blade assembly from the wiper arm assembly.
4.1. | Push in the button of the wiper blade assembly clip and remove
the wiper blade assembly from the inside radius of the wiper arm assembly. |
4.2. | Bring the wiper arm assembly out through the opening in the wiper
blade assembly. |
Installation Procedure
- Install the wiper blade
assembly on the wiper arm assembly.
- Operate the wipers and check for proper operation.