1. Turn the ignition switch to the OFF position.
2. Disconnect the instrument cluster heads-up display harness connector.
3. Turn the ignition switch to the ON position.

Does the ENG/ MET switch work for the trip calculator?

--

Go to Step 3

Go to Step 2

1. Inspect for a poor connection, an open, a short to ground, or a short to B+ on CKT 811.
2. If OK, replace the trip calculator. Refer to Driver Information Center Module Replacement .
3. Inspect the system.

Is the symptom still present?

--

Go to Instrument Cluster System Check

System OK

1. Replace the instrument panel heads-up display (HUD). Refer to Head Up Display Module Replacement .
2. Inspect the system.

Is the symptom still present?

--

Go to Instrument Cluster System Check

System OK