Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
DEFINITION: The fasten belts indicator lamp in the instrument cluster does not turn on when turning the ignition key from the OFF to the RUN position with the driver's seat belt unfastened. However, the BCM sounds the fasten seat belt reminder chime for six seconds. | ||||||||
1 | Was the Audible Warnings System Check performed? | -- | Go to Step 2 | |||||
2 |
Does the instrument cluster gages and indicators operate normally? | -- | Go to Step 3 | |||||
3 | Was the BCM Diagnostic System Check performed? | -- | Go to Step 4 | Go to Diagnostic System Check - Body Control System in Body Control System | ||||
4 |
Is the fasten belts indicator lamp on? | -- | Go to Step 8 | Go to Step 5 | ||||
5 |
Is the fasten belts indicator lamp filament open? | -- | Go to Step 9 | Go to Step 6 | ||||
6 | Using a J 39200 digital multimeter (DMM), measure the resistance between the BCM harness connector C2 terminal D12 and the instrument cluster harness connector C2 terminal F. Is the resistance measured within the specified range? | Go to Step 7 | Go to Step 10 | |||||
7 | Using a test light, connect between B+ and the instrument cluster harness connector C1 terminal I. Is the test light on? | -- | Go to Step 11 | Go to Step 12 | ||||
8 |
Is the repair complete? | -- | System OK | -- | ||||
9 | Replace the fastener belt indicator lamp bulb. Is the repair complete? | -- | System OK | -- | ||||
10 | Repair the poor connection or open in circuit 529. Is the repair complete? | -- | System OK | -- | ||||
11 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | System OK | -- | ||||
12 | Repair the poor connection or an open in circuit 1450. Is the repair complete? | -- | System OK | -- | ||||
