Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Disconnect the cruise control module.
- Set the ignition switch to the RUN position.
- Set the cruise control switch to the ON position.
- Connect a test lamp.
- Frontprobe the cruise control module connector between terminal C
and ground.
- Set and hold the OFF-ON-R/A switch to the R/A (Resume/Accelerate)
position in order to observe the test lamp.
Does the test lamp light?
| --
| Go to
Step 2
| Go to
Step 5
|
2
| Inspect for a poor connection at the cruise control module terminal C.
Is there a poor connection at terminal C?
| --
| Go to
Step 3
| Go to
Step 4
|
3
|
- Repair the poor connection at the cruise control module terminal C.
- Inspect the system.
Is the repair complete?
| --
| System OK
| --
|
4
|
- Replace the cruise control module. Refer to
Cruise Control Module Replacement
.
- Inspect the system.
Is the repair complete?
| --
| System OK
| --
|
5
| Inspect CKT 87 for a poor connection or open.
Is there a poor connection or open in CKT 87?
| --
| Go to
Step 6
| Go to
Step 7
|
6
|
- Repair a poor connection or open in CKT 87.
- Inspect the system.
Is the repair complete?
| --
| System OK
| --
|
7
|
- Replace the turn signal lever. Refer to
Multifunction Turn Signal Lever Replacement - On Vehicle
in Steering Wheel and Column.
- Inspect the system.
Is the repair complete?
| --
| System OK
| --
|
