Voltage is supplied to the Fog LPS Relay coil through circuit 317
when the following conditions are present:
• | The headlamp switch is in the HEAD position. |
• | The fog lamp switch is in the ON position. |
The fog lamps relay coil is grounded through the high beam filaments
through circuit 11. The fog lamps relay performs the following functions
through circuit 34:
• | Energizes voltage to the fog lamps |
• | Applies voltage to the fog lamps |
Since the coil of the Fog LPS Relay is grounded through the high beam
filaments, the relay de-energizes any time the high beams are ON because the
voltage is applied to both side of the relay coil.