This information refers to Domestic and Export calibration
packages. Use the DTCs that only apply to your specific RPO (Regular Production
Option). Each DTC is directly related to a diagnostic test. The
DTC sets based upon the DTC's individual running and setting criteria.
The following are the types of DTCs and their code characteristics:
Type A
| • | Requests illumination of the MIL on the first trip with a fail. |
| • | Stores a History DTC on the first trip with a fail. |
| • | Stores a Freeze Frame on the first trip with a fail. |
| • | Stores a Failure Record. |
| • | Updates the Failure Record the first time the test fails each
ignition cycle. |
Type B
| • | The code is enabled after the first trip with a fail. |
| • | The code is disabled if the second consecutive trip passes. |
| • | Requests illumination of the MIL on the second consecutive trip
with a fail. |
| • | Stores a History DTC on the second consecutive trip with a fail. |
| • | Stores a Freeze Frame on the second consecutive trip with a fail. |
| • | Stores a Failure Record when the first test fails. |
| • | Updates the Failure Record the first time the test fails each
ignition cycle. |
Type C1
| • | Requests illumination of the Service Lamp (not the MIL), or the
service message on the first trip with a fail. |
| • | Stores a History DTC on the first trip with a fail. |
| • | Does not store a Freeze Frame. |
| • | Stores a Failure Record when the test fails. |
| • | Updates the Failure Record the first time the test fails each
ignition cycle. |
Type C0
| • | Does not request illumination of any lamps. |
| • | Stores a History DTC on the first trip with a fail. |
| • | Does not store a Freeze Frame. |
| • | Stores a Failure Record when the test fails. |
| • | Updates the Failure Record the first time the test fails each
ignition cycle. |
Type X
| • | Diagnostics that are coded in the software, but will not run for
non-OBD2 export vehicles. |
| • | Some domestic vehicles use DTCs. |
| • | Even though codes are not stored, the DTC Type Table can still
be used as a resource when diagnosing problems with systems that are associated
with the type X DTCs. |
If a system is malfunctioning and the associated DTC has been disabled
(Type X), it may be beneficial to use the diagnostic table as a guide to aid
in diagnosis. Many of the DTC tables include a functional check
of the system that may pinpoint a problem. However, it is important
to remember that the DTC tables are specifically designed for use
only when a DTC is set. Therefore, a thorough understanding of
the normal operation of the system being diagnosed is necessary
and use of the tables for this purpose is at the discretion of
the technician.
