Electrical Connector Replacement. Pontiac Grand Prix 2000

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2000 🢒 Grand Prix 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T65-E 🢒 Electrical Connector Replacement

Removal Procedure

Remove the case side cover. Refer to Control Valve Body Cover Replacement .

Object Number: 48209 Size: SH

Disconnect the wiring harness assembly (224) from the following components:

•	Automatic transaxle fluid pressure manual valve position switch (395)

•	1-2 shift solenoid (315A)

•	2-3 shift solenoid (315B)

•	Torque converter clutch PWM solenoid (334)

•	Pressure control solenoid (322)

•	Automatic transaxle input speed sensor (440)

•	Wiring harness clips

Object Number: 48210 Size: SH

Remove the wiring harness assembly (224).

Object Number: 49407 Size: SH

Inspect the wiring harness assembly (224) for:

•	Cut or pinched wires

•	Cut wire insulation

•	Bent or broken electrical connections

•	Damaged terminal pins

Installation Procedure

Object Number: 48210 Size: SH

Install the wiring harness assembly (224).

Object Number: 48209 Size: SH

Connect the wiring harness assembly (224) to the following components:

•	Automatic transaxle fluid pressure manual valve position switch (395)

•	1-2 shift solenoid (315A)

•	2-3 shift solenoid (315B)

•	Torque converter clutch PWM solenoid (334)

•	Pressure control solenoid (322)

•	Automatic transaxle input speed sensor (440)

•	Wiring harness clips

Install the case side cover. Refer to Control Valve Body Cover Replacement .