Theft Deterrent Module Replacement for Pontiac Grand Prix 2000

1. Disable the SIR. Refer to Disabling the SIR System in SIR.
2. Remove the trim covers. Refer to Steering Column Trim Covers Replacement - On Vehicle .
3. Remove the lock cylinder. Refer to Ignition Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt.
4. Remove the theft deterrent module wiring harness from the steering column harness.
5. Disconnect the electrical connector.



6. Pull the theft deterrent module (2) away from the lock cylinder housing (1).

1. Push the theft deterrent module (2), onto the lock cylinder housing (1) .
2. Install the theft deterrent wiring harness to the steering column harness.
3. Connect the electrical connector.
4. Install the lock cylinder. Refer to Ignition Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt.
5. Replace the steering column trim covers. Refer to Steering Column Trim Covers Replacement - On Vehicle .
6. Enable the SIR system. Refer to Enabling the SIR System .
7. Program the new theft control module. Refer to Programming Theft Deterrent System Components