GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Grand Prix 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Adjuster Track Finish Cover Replacement

Removal Procedure

    Object Number: 310418 Size: SH
  1. Remove the push-in retainer on the front track cover.
  2. Remove the front track cover.

    3. Object Number: 305130 Size: SH
  3. For manual seat adjusters only, remove the track cover screw from the rear of the adjusters.

    4. Object Number: 310419 Size: SH
  4. For power adjusters only, unsnap the track covers from the rear of the adjusters.

Installation Procedure

    Object Number: 310419 Size: SH
  1. For power adjusters only, snap the track covers into the rear of the adjusters.

    2. Object Number: 310421 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. For manual seat adjusters only, install the track cover screw into the rear of the adjusters.

    3. Tighten
    Tighten the adjuster track cover screw to 2 N·m (18 lb in).

  3. Install the track covers into the front of the adjusters.

    4. Object Number: 310418 Size: SH
  4. Install the push-in retainer onto the front track cover.