| Table 1: | Powertrain Control Module (PCM) 3.1 L (LG8) |
| Table 2: | Powertrain Control Module (PCM) 3.8 L (L36, L67) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition Switch in RUN/Engine running/Automatic Transmission in PARK/Air Conditioner is OFF | |||
ECT Sensor | Eng 1, 2, EGR, EVAP, Fuel Trim, Misfire | °C/°F | Varies |
Engine Hot Lamp Circuit Status | ODM | Fault/OK | OK |
Engine Hot Lamp Command | ENG2 | On/Off | Off |
FC Relay 1 Circuit Status | ODM | OK/Fault | OK |
FC Relay 1 Command | ENG2 | On/Off | Varies |
FC Relay 2 and 3 Circuit Status | ODM | OK/Fault | OK |
FC Relay 2 and 3 Command | ENG2 | On/Off | Varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition Switch in RUN/Engine running/Automatic Transmission in PARK/Air Conditioner is OFF | |||
ECT | Eng 1, 2, EGR, EVAP, Cat, HO2S, Misfire, AIR | °C/°F | Varies |
Engine Hot Lamp | ENG2 | On/Off | Off |
Fan High Speed | ENG2, Cat | On/Off | Off |
Fan Low Speed | ENG2, Cat | On/Off | Off |
FC Relay 1 | ODM | Fault/OK | OK |
FC Relay 2 and 3 | ODM | Fault/OK | OK |
