GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 471317  Size: SH
  1. Position drivers seat to the rearward position.
  2. Remove the nut from the seat belt buckle.

  3. Object Number: 519326  Size: SH
  4. Disconnect the electrical connector from the seat belt buckle.
  5. Remove the seat belt buckle from the left front seat.

Installation Procedure


    Object Number: 471317  Size: SH
  1. Install the seat belt buckle to the left front seat.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install buckle side seat belt nut.
  4. Tighten
    Tighten the seat belt buckle nut to 42 N·m (31 lb ft).


    Object Number: 519326  Size: SH
  5. Connect the electrical connector from the seat belt buckle.
  6. Position the left front seat to the original position.