Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Audible Warnings Schematics | |||
1 | Did you review the operation and perform the necessary inspections? | Go to Step 2 | |
2 | Open the driver door. Does the door ajar indicator illuminate in the DIC when the driver door is opened? | Go to Step 3 | Go to Door Ajar Indicator Malfunction in Doors |
3 |
Does the test lamp illuminate in both cases? | Go to Step 4 | Go to Step 18 |
4 |
Does the test lamp illuminate? | Go to Step 5 | Go to Step 6 |
5 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 8 |
6 | Test the park lamp switch signal circuit for an open or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 15 |
7 |
Does the test lamp illuminate? | Go to Step 23 | Go to Fasten Safety Belt Indicator/Chime Inoperative in Seat Belts |
8 | Test the key in ignition ground circuit for an open or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 10 |
9 |
Does the test lamp illuminate? | Go to Step 12 | Go to Step 11 |
10 | Test the key in ignition signal circuit for an open, for a short to battery voltage, or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 13 |
11 | Test the DIC signal circuit for an open or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 14 |
12 | Test the vehicle speed signal circuit for an open. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 16 |
13 | Inspect for poor connections at the harness connector of the ignition and key alarm switch. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 21 |
14 | Inspect for poor connections at the harness connector of the DIC. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 22 |
15 | Inspect for poor connections at the harness connector of the headlamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 19 |
16 | Inspect for poor connections at the harness connector of the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 23 | Go to Step 20 |
17 | Repair the open in the seat belt switch signal circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 23 | -- |
18 | Repair the open in the suspected turn signal circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 23 | -- |
19 | Replace the headlamp switch. Refer to Headlamp Switch Replacement in Lighting Systems. Did you complete the replacement? | Go to Step 23 | -- |
20 | Replace the BCM. Refer to Body Control Module Replacement in Body Control Systems. Did you complete the replacement? | Go to Step 23 | -- |
21 | Replace the ignition key alarm switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle in Steering Wheel and Column-Tilt. Did you complete the replacement? | Go to Step 23 | -- |
22 | Replace the DIC. Refer to Driver Information Center Module Replacement . Did you complete the replacement? | Go to Step 23 | -- |
23 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
