GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Grand Prix 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Windshield Wiper Motor Replacement

Removal Procedure
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  2. Remove the wiper motor crank arm. Refer to Wiper Motor Crank Arm Replacement .
  3. Remove the wiper drive system module. Refer to Windshield Wiper System Module Replacement .

    4. Object Number: 815221 Size: SH
  4. Remove the wiper motor screws.
  5. Remove the wiper motor from the wiper drive system module.
  6. Remove the shaft seal and the water shield from the wiper motor.

Installation Procedure

    Object Number: 815221 Size: SH
  1. Install the water shield and shaft seal onto the wiper motor.
  2. Position the wiper motor to the wiper drive system module.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the wiper motor screws.

    4. Tighten
    Tighten the screws to 7 N·m (62 lb in).

  4. Install the wiper drive system module. Refer to Windshield Wiper System Module Replacement .
  5. Install the wiper motor crank arm. Refer to Wiper Motor Crank Arm Replacement .
  6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.