Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Power and Grounding Connector End Views in Wiring Systems | |||
1 | Did you perform the Lighting System Diagnostic System Check? | Go to Step 2 | |
2 |
Are all of the courtesy lamps OFF? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Disconnect the headlamp switch. Are the courtesy lamps on? | Go to Step 4 | Go to Step 11 |
4 | Test the courtesy lamp switch signal circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 5 |
5 | Disconnect the BCM connector C1. Using a test lamp connected to battery positive voltage, probe the courtesy lamp low control circuit at the BCM harness connector. Does the test lamp illuminate? | Go to Step 8 | Go to Step 6 |
6 |
Do the courtesy lamps turn off when you disconnect any of the door lock ajar switches? | Go to Step 9 | Go to Step 7 |
7 | Test each door switch courtesy open circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 10 |
8 | Repair a short to ground in the courtesy lamps low control circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 12 | -- |
9 | Replace the door lock ajar switch. Refer to Front Side Door Lock Replacement or Rear Door Lock Replacement in Doors. Did you complete the replacement? | Go to Step 12 | -- |
10 | Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the repair? | Go to Step 12 | -- |
11 | Replace the headlamp switch. Refer to Headlamp Switch Replacement . Did you complete the replacement? | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
