GM Service Manual Online
For 1990-2009 cars only

Tools Required

    • J 41013 Rotor/Drum Flange Resurfacing Kit
    • J 42450-A Wheel Hub/Flange Resurfacing Kit

Removal Procedure

    Notice: Any new rotor must have the protective coating removed from the friction surfaces before being placed in service. Remove the protective coating using denatured alcohol or an equivalent brake cleaner, and wipe the surface clean with clean cloths. Do not use gasoline, kerosene, or other oil base solvents which may leave an oily residue. This residue is damaging to the brake lining and is flammable.


    Object Number: 732954  Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Notice: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.

  4. Remove and support the caliper and bracket as an assembly with heavy mechanics wire. DO NOT disconnect the hydraulic flexible brake hose. Refer to Rear Brake Caliper Replacement .
  5. Remove the brake rotor.
  6. Important: When a brake rotor has been separated from a hub/axle flange, the mating surface of the brake rotor must be cleaned of any rust or contaminants. Failure to do this may result in lateral runout of the brake rotor, and brake pulsation.

  7. If the brake rotor is to be reinstalled to the vehicle, use theJ 41013 in order to clean any rust or corrosion from the hub/axle flange mating surface of the brake rotor.
  8. Use the J 42450-A in order to clean the wheel hub flange.

Installation Procedure


    Object Number: 732954  Size: SH
  1. Install the brake rotor.
  2. Install the caliper bracket. Refer to Rear Brake Caliper Replacement .
  3. Install the tire and the wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.