GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2003 🢒 Grand Prix 🢒 Engine 🢒 Engine Electrical 🢒 Engine Mount Bracket Replacement

Removal Procedure
  1. Remove the engine mount. Refer to Engine Mount Replacement .

    2. Object Number: 96010 Size: SH
  2. Remove the engine mount upper nuts.
  3. Remove the engine mount bracket from the engine mount.

Installation Procedure

    Object Number: 96010 Size: SH
  1. Install the engine mount bracket to the engine mount.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the engine mount upper nuts.

    3. Tighten
    Tighten the engine mount upper nuts to 47 N·m (35 lb ft).

  3. Install the motor mount. Refer to Engine Mount Replacement .
  4. Lower the vehicle.
  5. Lower the engine.
  6. Connect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.