Removal Procedure
- Remove the floor console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.
- Disconnect the electrical connector.
- Disengage the retainers.
- Press the switch from the bottom out the
top of the floor console. Remove the traction control switch.
Installation Procedure
- Align the tabs on the switch with the slots
in the floor console.
- Press the traction control switch through
the opening in the floor console.
- Connect the electrical connector.
- Install the floor console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.