Cruise Control Switch Replacement for Pontiac Grand Prix 2005
Removal Procedure
- Disable the SIR system. Refer to
SIR Disabling and Enabling
in SIR.
- Remove the inflatable restraint steering wheel module. Refer to
Inflatable Restraint Steering Wheel Module Replacement
in SIR.
- Remove the steering wheel. Refer to
Steering Wheel Replacement
in Steering Wheel and Column.
- Remove the cruise control switch screws (1).
- Remove the steering wheel shroud screws (2).
- Remove the steering wheel shroud (3).
- Disconnect the electrical connector.
- Remove the cruise control switch (1) from the steering wheel (2).
Installation Procedure
- Install the cruise control switch (1) to the steering wheel (2).
- Connect the electrical connector.
- Install the steering wheel shroud (3) to the steering wheel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the steering wheel shroud screws (2).
Tighten
Tighten the steering wheel shroud screws to 2.2 N·m (19 lb in).
- Install the cruise control switch screws (1).
Tighten
Tighten the cruise control switch screws to 3.5 N·m (31 lb in).
- Install the steering wheel. Refer to
Steering Wheel Replacement
in Steering Wheel and Column.
- Install the inflatable restraint steering wheel module. Refer to
Inflatable Restraint Steering Wheel Module Replacement
in SIR.
- Enable the SIR system. Refer to
SIR Disabling and Enabling
in SIR.