GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 928956  Size: SH
  1. Pull the instrument panel (I/P) accessory trim plate rearward slightly for access to the steering column filler. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages, and Console.
  2. Remove the steering column filler. Refer to Steering Column Opening Filler Replacement in Instrument Panel, Gages, and Console.
  3. Tilt the steering wheel to the lowest position.
  4. Grasp the edge of the I/P cluster trim plate. Pull the plate rearward to disengage the retainers.
  5. Disconnect the electrical connector from the dimmer switch.

  6. Object Number: 928608  Size: SH
  7. Remove the screws from the dimmer switch.

  8. Object Number: 928662  Size: SH
  9. Remove the dimmer switch.

Installation Procedure


    Object Number: 928662  Size: SH
  1. Align the dimmer switch to the I/P cluster trim plate.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 928608  Size: SH
  3. Install the dimmer switch screws.
  4. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 928956  Size: SH
  5. Connect the electrical connector to the dimmer switch.
  6. Align the locating pins and the retainers on the I/P cluster trim plate to the openings in the I/P.
  7. Push in the trim plate at each of the retainer locations. Completely engage the retainers.
  8. Return the steering wheel to the original position.
  9. Install the steering column filler. Refer to Steering Column Opening Filler Replacement in Instrument Panel, Gages, and Console.
  10. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages, and Console.