Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
DTC Descriptor
DTC B3567 59: Driver Information Center Select Switch Circuit/Component Protection Time - OutCircuit/System Description
The driver information center (DIC) monitors the DIC switch signals to determine the switch inputs. The switch inputs to the DIC is low when a switch is activated. The DIC switch is a momentary contact switch that connects a series of resistors in a resistor ladder format. Each switch state - GAGES, TRIP ODOMETER, SET/RESET, INFO, FUEL, OPTIONS - corresponds to a certain resistance value.
Conditions for Running the DTC
The ignition is in ACCESSORY or RUN.
Conditions for Setting the DTC
The DIC detects that the switch is stuck.
Action Taken When the DTC Sets
The DIC ignores the switch inputs.
Conditions for Clearing the DTC
| • | The DTC becomes history when the conditions for setting the DTC are no longer present. |
| • | The history DTC clears after 40 malfunction-free warm-up cycles. |
Reference Information
Schematic Reference
Connector End View Reference
Description and Operation
Driver Information Center (DIC) Description and Operation
Electrical Information Reference
Scan Tool Reference
Circuit/System Testing
Verify that DTC B3567 is not set.
| ⇒ | If DTC B3567 is set , replace the DIC. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for the DIC replacement, setup and programming
