- Inspect the components that are still on the transmission case for the following conditions:
| • | Loose, cross-threaded, or damaged pipe fittings on the transmission oil cooler |
| • | A loose, missing, or damaged transmission name plate |
- Inspect the transmission case for the following conditions:
| • | Gasket sealing surfaces that are damaged or which have porosity |
| • | Bolt or screw holes that are stripped or damaged (repair with a thread insert) |
| • | Damaged or porous case oil passages |
| • | Damaged snap ring grooves or housing splines |
| • | Loose, missing, or damaged band anchor pins |
| • | Damaged or porous case surfaces |
| • | Plugged drain back holes for the torque converter oil seal |
- Inspect the components that are still on the transmission case for the following conditions:
| • | A loose, plugged, or damaged transmission vent assembly |
| • | A loose, cross-threaded, or damaged oil pressure test hole plug |
- Inspect the dowel pins (526) for damage. Replace if necessary.
