GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 910510  Size: SH
  1. Use a plastic trim tool to remove the ignition switch bezel.

  2. Object Number: 928559  Size: SH
  3. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement.
  4. Apply the park brake.
  5. Shift the transaxle to 1.
  6. Remove the I/P center compartment screws.
  7. Remove the I/P center compartment.

Installation Procedure


    Object Number: 929176  Size: SH
  1. Align the I/P center compartment locator to the opening in the vehicle location antenna module bracket.

  2. Object Number: 928559  Size: SH
  3. Install the I/P center compartment to the I/P.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the I/P center compartment screws.
  6. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  7. Shift the transaxle to P.
  8. Press to release the park brake.
  9. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement.

  10. Object Number: 910510  Size: SH
  11. Install the ignition switch bezel.