Battery Negative Cable Disconnection and Connection LS4
Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Record all of the vehicle preset radio stations.
- Turn OFF all the lamps and the accessories.
- Ensure the ignition switch is in the OFF position.
- Loosen the negative battery cable terminal nut.
- Remove the negative battery cable terminal (1) from the battery.
Installation Procedure
Important: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.
- Install the negative battery cable terminal (1) to the battery.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the negative battery cable terminal nut.
Tighten
Tighten the nut to 15 N·m (11 lb ft).
- Set the clock and program the radio stations back into the radio as recorded at the beginning of the procedure. Refer to
Radio/Audio System Description and Operation
.
Battery Negative Cable Disconnection and Connection L26
Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Record all of the vehicle preset radio stations.
- Turn OFF all the lamps and the accessories.
- Ensure the ignition switch is in the OFF position.
- Loosen the negative battery cable terminal nut.
- Remove the negative battery cable terminal (2) from the battery.
Installation Procedure
Important: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.
- Install the negative battery cable terminal (2) to the battery.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the negative battery cable terminal nut.
Tighten
Tighten the nut to 15 N·m (11 lb ft).
- Set the clock and program the radio stations back into the radio as recorded at the beginning of the procedure. Refer to
Radio/Audio System Description and Operation
.