OIL CONTROL NEW VALVE STEM OIL SEAL AVAIL.

A new valve stem oil seal is now available for 1982 through 1984 1.8L OHC engines (VIN codes O and J). The new seals part #90180294 should be used whenever oil control conditions are encountered or during any engine repair operation requiring valve spring removal.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.