Removal Procedure
Notice: Refer to Fuel Pressure Notice in the Preface section.
- Relieve the fuel system pressure. Refer to
Fuel Pump Replacement
.
- Disconnect the inlet/outlet fuel lines by pushing the line connector lock and pulling off the hose of the fuel filter tube (1).
- Remove the screw from the retaining clamp.
- Remove the fuel filter (1).
Installation Procedure
Notice: Refer to Methanol Fuel Notice in the Preface section.
- Install the new fuel filter into the retaining clamp. Note the flow direction.
- Connect the inlet/outlet lines. Secure the lines with the connector lock.
- Install the fuel pump.
- Perform a leak test of the fuel filter.