GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Matiz 🢒 Engine 🢒 Engine Controls - 1.0L 🢒 Crankshaft Position Sensor Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1240900 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner assembly.
  3. Disconnect the crankshaft position (CKP) sensor connector.
  4. Remove the CKP sensor retaining bolt.

Installation Procedure

    Object Number: 1240900 Size: SH
  1. Install the CKP sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the CKP sensor retaining bolt.

    3. Tighten
    Tighten the CKP sensor retaining bolt to 5-8 N·m (89-124 lb in).

  3. Connect the CKP sensor connector.
  4. Install the air cleaner assembly.
  5. Connect the negative battery cable.