Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Wiper/Washer Connector End Views DEFINITION: This table diagnoses the rear wipers are always on when the rear wiper/washer switch is in the OFF position. | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 |
Are the rear wipers always ON? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections |
3 |
Are the rear wipers always ON? | Go to Step 5 | Go to Step 4 |
4 | Replace the rear wiper/washer switch. Did you complete the replacement? | Go to Step 6 | -- |
5 | Repair the short to voltage condition. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | -- |