| Subject: | Revised DTC P0101 |
| 1996-99 Buick Century, Regal |
| 1996 Chevrolet Beretta, Corsica |
| 1996-99 Lumina, Monte Carlo, Venture |
| 1996 Oldsmobile Cutlass Ciera |
| 1996-97 Oldsmobile Cutlass Supreme |
| 1996-98 Oldsmobile Achieva |
| 1996-99 Oldsmobile Silhouette |
| 1997-98 Oldsmobile Cutlass |
| 1996-99 Pontiac Grand Am, Grand Prix, Trans Sport |
| with 3.1L or 3.4L Engine (VINs J, M, X, E - RPOs LG8, L82, LQ1,
LA1) |
This bulletin is being issued to revise DTC P0101 in the Engine Controls
sub-section of the Service Manual. Please replace the current information
in the Service Manual with the following information.
The following information has been updated within SI2000. If you are
using a paper version of this Service Manual, please make a reference to this
bulletin on the affected page.
The text in Steps 7 or 9 (depending on the model) in DTC P0101 has been
revised to read "Does the scan tool parameter go from 0 to 100%?".
