- Connect the passenger
seat belt pretensioner yellow 2-way connector (3) located under the front
passenger seat.
- Install the connector position assurance (CPA) to the passenger
seat belt pretensioner yellow 2-way connector (3).
- Connect the passenger side air bag yellow 2-way connector (4)
located under the front passenger seat.
- Install the connector position assurance (CPA) to the passenger
side air bag yellow 2-way connector (4).
- Connect the driver seat
belt pretensioner yellow 2-way connector (3) located under the driver seat.
- Install the connector position assurance (CPA) to the driver seat
belt pretensioner yellow 2-way connector (3).
- Connect the driver side air bag yellow 2-way connector (4) located
under the driver seat.
- Install the connector position assurance (CPA) to the driver side
air bag yellow 2-way connector (4).
- Connect the passenger
frontal air bag yellow 2-way connector (1) located behind the right insulator
panel.
- Install the connector position assurance (CPA) (2) to the passenger
frontal air bag yellow 2-way connector (1).
- Install the right insulator panel.
- Connect the driver frontal
air bag yellow 2-way connector (2) located at the base of the steering column.
- Install the connector position assurance (CPA) (3) to the driver
frontal air bag yellow 2-way connector (2).
- Install the left insulator panel.
- Install the SDM Fuse to the fuse block.
- Staying well away from the airbags and pretensioners, turn ON
the ignition.
16.1. | The AIR BAG warning lamp will flash seven times. |
16.2. | The AIR BAG warning lamp will then turn OFF. |
- Perform
Diagnostic System Check - SIR
if the AIR BAG warning lamp does not operate as described.