Has the Park Brake Diagnostic System Check been performed?

--

Go to Step 2

Go to Park Brake System Check

Inspect the park brake actuator levers at the end of the left rear and right rear park brake cables.

Are both of the park brake actuator levers in their full release positions?

--

Go to Step 3

Go to Step 4

Adjust the applicable brake linings and ensure that the park brake actuators operate freely.

Has the inspection/repair been performed?

--

Go to Step 5

--

Inspect the park brake cables for binding. Replace as necessary.

Has the inspection/repair been performed?

--

Go to Step 5

--

1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Use your hands in order to rotate the rear wheels.

Important: Slight brake lining drag is considered normal.

Do the rear wheels rotate freely?

--

System OK

Go to Step 1