GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Montana 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Cable Guide Replacement - Front

Removal Procedure

    Object Number: 342941 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the park brake cable front guide bolt.
  3. Remove the park brake cable front guide.

Installation Procedure

    Object Number: 342941 Size: SH
  1. Install the park brake cable front guide.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the park brake cable front guide bolt.

    3. Tighten
    Tighten the park brake cable front guide bolt to 13 N·m (115 lb in).

  3. Lower the vehicle.