GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Montana 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Clutch Rotor and Bearing Removal

Clutch Rotor and Bearing Removal V5 - Direct Mount

Tools Required

    • J 41790-A Compressor Holding Fixture
    • J 41552 Compressor Pulley Puller
    • J 33023-A Puller Pilot

    Object Number: 157595 Size: SH
  1. Install the compressor onto the J 41790-A .

    2. Object Number: 157223 Size: SH
  2. Remove the clutch plate and hub assembly (2).
  3. Remove the clutch rotor and bearing assembly retaining ring (3), using external snap ring pliers (1).

    4. Object Number: 157224 Size: SH
  4. Place the J 33023-A on the clutch rotor.

    5. Object Number: 157225 Size: SH
  5. Install the J 41552 down into the inner circle of slots in the rotor.

    6. Turn the compressor pulley puller clockwise in the slots to engage the puller tangs with the rotor.

  6. Hold the compressor pulley puller in place and use a wrench to turn the center forcing screw against the puller pilot to remove the clutch rotor and bearing assembly.