Tools Required
J 45296 Frame Insulator
Remover/Installer
Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the steering intermediate shaft. Refer to
Intermediate Steering Shaft Replacement
in Steering
Wheel and Column.
- Install a jackstand under the center of the frame, between the
front frame insulators.
- Remove the front frame
bolts and retainers.
- Lower the front of the frame.
- Remove the frame front upper insulators.
- Install the J 45296
to the front frame insulator you are
removing.
- Using J 45296
,
remove the front frame insulator from the frame.
Installation Procedure
- Clean the front frame insulator opening.
- Apply a thin coat of rubber lubricant GM P/N 1051717,
(Canadian P/N 5728223), or equivalent to the inside of the
front frame insulator opening.
- Apply a thin coat of rubber lubricant GM P/N 1051717,
(Canadian P/N 5728223), or equivalent to the front frame insulator.
- Align the front frame
insulator to the front frame opening with the front frame alignment tabs
facing to the front.
- Using J 45296
,
install the front frame insulator to the front frame.
- Install the frame front
upper insulators.
- Raise the front of the frame.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the front frame bolts and retainers.
Tighten
Tighten the bolts to 150 N·m (111 lb ft).
- Remove the jackstand.
- Connect the steering intermediate shaft. Refer to
Intermediate Steering Shaft Replacement
in Steering Wheel and Column.
- Lower the vehicle.