Rear Camber Adjustment AWD

1. Place vehicle on alignment machine with rear wheels supported by Weaver plates.



2. Loosen rear lower control arm mounting nuts (3, 4) .
3. Adjust camber with cam bolt (1).
4. Confirm correct camber value.
5. Check toe alignment and adjust if required.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Tighten the lower control arm mounting nuts (3, 4).

Tighten
Tighten the nut (3) 125 N·m (107 lb ft); tighten (4) to 50 N·m (37 lb ft).

2. Test drive the vehicle.