Schematic Reference: Instrument Cluster Schematics

Did you perform the IPC Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Start the engine.

Does the tachometer operate normally?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Turn ON the ignition, with the engine OFF.
2. Install a scan tool.
3. With a scan tool, sweep the tachometer.

Does the tachometer move from 0 RPM to 7000 RPM and back to 0 RPM when you sweep this gage up and down?

Go to Diagnostic System Check - Engine Controls in Engine Controls

Go to Step 4

Important: Perform the set up procedure for the replacement IPC.

Replace the IPC. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3