- Inspect the fourth clutch assembly for
the following conditions:
| • | Wear or damage to the steel plates (502, 528) |
| • | Peened splines, flaking, or worn fiber on the fiber plate assemblies
(501) |
- Inspect the fourth clutch shaft assembly (504) for the following
conditions:
| • | Cut or worn fourth clutch plate splines |
| • | Stripped input sun gear splines |
| • | A damaged bushing journal |
| • | Cracks or damage to the hub or shaft |
- Install the fourth clutch shaft assembly
(504) into the case through the driven sprocket. The fourth clutch shaft
assembly (504) must fully seat into the input sun gear.
- Install the drive link lube scoop (608) into the case.
- Install the fourth clutch apply plate
(528) over the fourth clutch shaft assembly and into the driven sprocket
support with the machined side towards the driven sprocket.
- Install the remaining fourth clutch plates, starting with a fiber
plate assembly (501) and alternating with steel plates (502).
- The fourth clutch steel plates (502, 528) should align with the
driven sprocket support as shown.
