GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Montana Ext. 🢒 General Information 🢒 General Information 🢒 Wheel Trim Cover Replacement

Removal Procedure
  1. Loosen/remove the wheel nut caps.

    2. Object Number: 379667 Size: SH
  2. Use a flat-bladed tool in order to pry the edge of the wheel cover out.
  3. Use your fingers in order to pull the wheel cover off of the wheel.
  4. Place the wheel cover down with the finished surface facing up. Do Not place anything on top of the wheel cover.

Installation Procedure

    Object Number: 379667 Size: SH
  1. Install the wheel cover.

    2. Object Number: 379564 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the wheel nut caps.

    3. Tighten
    Tighten the wheel nut caps to 3 N·m (27 lb in).