Caution: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
2. Remove the front fascia. Refer to Front Bumper Fascia Replacement .

1

Bolts, Front End Inflatable Restraint Discriminating Sensor (Qty: 2)

Tighten
9 N·m (80 lb in)

2

Sensor, Front End Inflatable Restraint Discriminating

Tip