GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Montana SV6 🢒 Preface 🢒 Cautions and Notices 🢒 Fastener Tightening Specifications

Application

Specification

Metric

English

Driver Information Center Display Switch Screw

2 N·m

18 lb in

Electronic Control Unit Screw

2 N·m

18 lb in

Front End Inflatable Restraint Discriminating Sensor Bolt

9 N·m

80 lb in

Inflatable Restraint Sensing and Diagnostic Module (SDM) Bolt

10 N·m

89 lb in

Inflatable Restraint Side Impact Module Nut

5 N·m

44 lb in

Inflatable Restraint Side Impact Sensor Bolt

10 N·m

89 lb in

Inflatable Restraint Steering Wheel Module Coil

2.5 N·m

22 lb in

Instrument Panel Compartment Screw

2 N·m

18 lb in

Instrument Panel Inflatable Restraint Module

10 N·m

89 lb in

Seat Belt Guide Loop Nut

42 N·m

31 lb ft

Seat Belt Retractor Bolt

42 N·m

31 lb ft

Steering Column Lower Shroud Bolt

1.5 N·m

13 lb in

Steering Column Upper Shroud Bolt

3.5 N·m

31 lb in

Steering Wheel Nut*

40 N·m

30 lb ft

* This is a prevailing torque type fastener. This fastener may be reused ONLY if:

    • The fastener and its counterpart are clean and free from rust.
    • The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating.

If the fastener does not meet these criteria, REPLACE the fastener.