Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the hood hinge. Refer to Hood Hinge Replacement .
2. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
3. Remove the headlamp.
4. Remove the antenna on passenger fender. Refer to Radio Antenna Replacement .

1

Bolt, Front Fender Upper (Qty: 4)

Tighten
8 N·m (71 lb in)

2

Bolt, Front Fender Rear (Qty: 3)

Tighten
8 N·m (71 lb in)

3

Bolt, Front Fender Lower Rear

Tip
Reposition the rocker panel molding to gain access to the bolt.

Tighten
8 N·m (71 lb in)

4

Bolt, Front Fender Lower Front

Tighten
8 N·m (71 lb in)

5

Bolt, Front Fender Upper Front

Tighten
6 N·m (53 lb in)

6

Nut, Front Fender Front Lower Bracket (Qty: 2)

Tip
Loosen the nut enough to allow the fender to slide out of the slots.

Tighten
6 N·m (53 lb in)

7

Fender Assembly, Front