Removal Procedure
- Open the LH sliding door.
- Remove the bolt (3) from the fuel filler interlock bracket (4).
- Slide the fuel filler interlock bracket toward the front of the vehicle.
- Remove the fuel filler interlock from the body.
- Disconnect the fuel filler interlock cable from the fuel filler interlock bracket.
Installation Procedure
- Connect the fuel filler interlock cable (2) to the fuel filler interlock
bracket.
- Insert the fuel filler interlock into the keyhole slot (1) to the body.
- Slide the fuel filler interlock bracket toward the rear of the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolt (3) to the fuel filler interlock bracket.
Tighten
Tighten the fuel filler door interlock bracket retaining bolt to 25 N·m (18 lb ft).
- Close the sliding door.
- Verify fuel filler door operation.