Removal Procedure
- Open the liftgate.
- Remove screws (1) from liftgate striker (2).
- Remove liftgate striker and rear stowage compartment bracket (3) from the rear floor.
Installation Procedure
- Align the rear stowage compartment bracket (3), spacer, and liftgate striker (2)
to the holes in body.
Notice: Refer to Fastener Notice in the Preface section.
- Install the liftgate striker retaining screws (1).
Tighten
Tighten the screws in sequence to 25 N·m (18 lb ft).
- Close the liftgate.