For 1990-2009 cars only
DTC B0105 After The SDM Is Replaced - keywords sensor sir communication
| Subject: | DTC B0105 after the SDM is replaced |
| Models: | 2005 Buick Terraza |
| 2005 Chevrolet Uplander |
| 2005 Pontiac Montana SV6 |
| 2005 Saturn Relay |
This PI was superseded to update part numbers. Please discard PIT3764A.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern:
SIR light on and Current B0105 (Incorrect Front End Sensor 2 Installed) after the SDM was replaced.
Recommendation/Instructions:
If a current DTC B0105 resets after installing a new SDM a second design sensor part number 10363046 should be installed to correct the concern.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
